Variateur HRC

Bonjour, je possède un Variateur HRC et je n arrive pas à le connecter a mon boîtier pour le programmer… quelqu’un pourrait m’aider?
D’avance merci pour votre aide
L’occasion Hervé

Je ne suis pas un specialiste des varios HRC mais de ce que je vois ce sont des ZTW Beast… Si @Lionel ne passe pas par ici, tu peux farfouiller un peu sur la toile, mais probablement que ce document peut partiellement deja repondre a certaines questions:

LED Program card

  1. The ZTW Program card with LED display is easy to use and convenient to carry. All of the
    programmable functions are shown on the program card.
  2. Turn on the ESC. Remove the Signal wire and plug it into the top-socket on the Program
    card , wait for 2 seconds until the LED is ON.
    The first programmable function will be shown, if an error occurs, please reconnect them.
  3. If ESC is not connected with the batteries, the Program card should be connected with other
    power supply, the range of power supply is within 5.0-6.3V.
  4. Press the button “Menu” on the Program card and circularly select each programmable
    function. At that time the number of the programmable function will be displayed on the left of
    the LED, the current value will be displayed on the right side. Then press the button Value to
    change the value and press the button OK to confirm. At the same time the Red indicating LEDs
    of both program card and the ESC blink. Turn off the ESC, the modified settings will be saved in
    the ESC’s memory.
  5. Press the button Reset to restore the default settings.

Bonne chance!

Paul

Lionel m’a confirmé qu’il ne connaissait pas ce modèle mais il m’a donné une adresse email pour poser les questions…